POW-R WRAP

A specially formulated water activated fiberglass tape designed as a strong, permanent and economical repair for water lines, irrigation lines, pipe lines, sewer lines, drainage lines or any other type of fluid or gaseous transporting lines. Permanent repairs can be made on almost any type of material and meets EPA requirements for Drinking water systems.

Solderlene is a high quality, paste type, non-acid soldering flux.

Industrial strength wetting agents to promote solder flow. For use with low and mid-temp. soft solders, both lead and lead-free. Effective on all metals except aluminum and magnesium.

Available in 4 oz. brush top plastic jars

LEAK LOCK PIPE JOINT SEALANT  (BRUSH-TOP CANS, TUBES)

Leak Lock is a state-of-the-art high strength, pipe joint sealant consisting of chemically resistant film formers, plasticizer, reinforcing fillers and solvents .

A resin based brushable paste which remains permanently flexible, adheres to internal surfaces and fills voids. Ideal for metal and plastic materials subject to extreme vibrations. Effective in temperatures from -200°F (-93°C) to 400°F (204°C), full vacuums and pressures to 10,000 PSI

Leak Lock can be used on all metal or plastic materials, including but not limited to, aluminum, aluminum alloys, cast irons, copper, copper alloys, (brass, bronze, etc...), magnesium and magnesium alloys, carbon steels, stainless steels, galvanized surfaces, PVC, CPVC, ABS, fiberglass, black polypropylene, and kynar. Leak Lock should be applied to threaded joints, flanged joints, gasket surfaces and all mating surfaces where a fluid-tight seal is required.

Trax is a clear, non-toxic, non-residue, bubble-type liquid leak detector formulated to produce long lasting bubbles under 'job-site' conditions. Detects leaks as small as 1 micron  and evaporates leaving no residue. Requires no cleanup, does not pit surfaces and is environmentally friendly.

Trax is oxygen compatible and meets the performance requirements of Military specifications: MIL 25567

Type I A, B & C. Temp. range: 27°F (-3°C) to 200°F (93°C).

Available in 1 1/3 oz. squeeze bottle; 10 oz. squeeze bottle with extendible spout;

Aids in the reduction of slip & fall accidents. A unique product that causes a microscopic etch on stone, concrete, and all tub surfaces.  Also great product to use around swimming pools.  One application lasts for many months depending on traffic conditions.

Can be used on metal, glass, porcelain, ceramics, wood, rubber,  & most paint & plastics.  As an instant gasket maker, this product replaces wide range of cork, paper, asbestos, felt & metal gaskets. This product has excellent adhesive characteristics, high chemical resistance & will not sag or shrink.  Red withstands temperatures of 600 degrees F (intermittent to 650 degrees F), other to 500 degrees F (intermittent to 600 degrees F) & pressures up to 350 psi.  Virtually unaffected by chemical deterioration, extreme weather, temperature or aging.  Safe on oxygen sensors & meets GM & many OEM specifications.  All are now low volatile.

CAULKING SEALANT  (CLEAR-RTV Silicone, WHITE-The White Stuff)     (AEROSOL)

Ideal for use wherever a strong permanently elastic weatherproof caulk, sealant or adhesive is needed.  Designed to seal non-porous surfaces around ceramic tile, cultured marble, showers, tubs sinks & plumbing fixtures.  Ideal for caulking windows, doors, sills & ceiling cracks & crevices.  Useful for sealing cracks in machinery, heating & ventilation duct work, plumbing fixtures, electrical connections & low pressure water & drain lines.  Bonds nameplates, machinery flanges, glass, signs, electrical insulation, etc.  Temperature resistant.  Remains flexible & will not shrink, crack, crumble or dry out. WHITE contains a mildew-cide to resist mildew growth.

Available as:  RTV Silicone - Clear,   The White Stuff - White

FOAM ALONE * EXPANDABLE FOAM WITH FLAME RETARDANT (AEROSOL)

A convenient aerosol that dispenses a one part, liquid urethane foam which expands 200 to 300% and cures to a durable, hard foam, insulating sealant. Fills large cracks and holes that caulk cannot. Forms an airtight, water resistant and weather resistant bond on surfaces such as masonry, wood, metal, glass, tile and most plastics. Helps eliminate energy escape. Prevents the entrance of insects or rodents. Dries tack-free in 15 to 30 minutes and cures completely in 8 to 24 hours, depending on humidity. Easy to apply. Conforms to any shape.

EPOXY STEEL     (TUBES)

This fix-everything putty, fills cracks, stops leaks, and holds materials together.   You may drill, file, or tap within 1 hour.  The unique ability to bond with unlike materials such as PVC, steel, iron, aluminum, wood, glass, concrete, copper, makes it a real handyman’s special.  Epoxy steel can also withstand temperatures at a continuous 500. F.  Don’t worry, you can also stain

THIS IS A STICKUP * MULTI-PURPOSE ADHESIVE    (AEROSOL)

THIS IS A STICK UP is a USDA authorized, waterproof, pressure sensitive adhesive.  Use as a multipurpose adhesive on all types of surfaces.  Special fan tip allows for quick, easy application.  Dries quickly, yet remains flexible.  High solids content yields higher bond strength.  Classified P-1 USDA

A super durable, coating used to fill-in and patch around flashings, gutters, vent pipes, and roofing material seams. Stays flexible with variable weather conditions. Portable, convenient aerosol is easy to apply evenly and eliminates messy cleanup and waste.

NP1™ Polyurethane Sealant is a one-component high-performance gun-grade moisture-curing polyurethane sealant designed for a wide range of sealing and caulking applications in active exterior joints. NP1™ Polyurethane Sealant requires no mixing and typically bonds to many materials without a primer, including concrete and masonry.

Available in 10.1oz Cartridges, 20 oz Sausage Tubes

SL 1™ is a one-component non-priming, self-leveling elastomeric polyurethane designed for expansion joints in concrete floors and decks. Use it where flexibility as well as abrasion and puncture resistance are required.  825ml  27.9 oz

Loctite® Power Grab® Adhesive has the highest initial tack of any construction adhesive out there. Versatile enough to be used on a multitude of surfaces. It's so powerful that it can be used in place of nails and screws in many do-it-yourself projects. 9x higher instant grab then traditional adhesives. Minimal bracing - No Flashing off. Latex based for easy water clean up, Low odor, won't dry out.
GREENGUARD Children and Schools Certified®
Size: 10.1 oz

Specifically for aluminum and Stainless Steel Trailers. Do not use on other surfaces such as aluminum wheels or aluminum engine blocks.

Rugged and dependable high efficiency pump with an easy to use, no spill funnel top. Suitable for spraying many different liquids.